Τεχνικές ερωτήσεις για ηλεκτρονικά εξαρτήματα ΜΟΝΟ τηλεφωνικά καθημερινές 9:00 - 17:00 εκτός Σαββάτου

Η εταιρία θα παραμείνει κλειστή απο Μ.Παρασκευή εως και Δευτέρα του Πάσχα - Καλή Ανάσταση σε όλους

LCD Module 84*48 84x84 Blue backlight type Nokia 5110 for Arduino
Κωδικός Cableworks: 1116.593

BrandOEM MPNOEM
4.46
χωρίς ΦΠΑ 3.60
Σε Απόθεμα
+
Wishlist
Αποστολές & Επιστροφές
Τρόποι πληρωμής
Γιατί Cableworks;
Γρήγορη και ασφαλής παράδοση

Αποστέλλουμε παραγγελίες σε όλη την Ελλάδα με ΕΛΤΑ Courier και ACS

Presales και Aftersales

Για να σας λύνονται όλες οι τεχνικές απορίες

Επιστροφές εντός 14 ημερών

Αρκεί το προϊόν να μην έχει ανοιχτεί και να μην έχουν προκληθεί φθορές στην συσκευασία του

  • 84 X 84 dot matrix LCD, can show 4 lines of characters
  • Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND.
  • Support different types of MCU, such as the arduino, AVR, SPI, MCS51 and so on.
  • Transfer rate up to 4Mbps, can full speed write display data without waiting time.
  • Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
  • LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small
  • Low power supply,the working current in normal situation is lower than 200渭A,and has
  • power-down mode

Connections :

  • RST--------- reset
  • CE---------- chip selection
  • DC---------- data/commands choice
  • DIN--------- serial data line
  • CLK--------- serial Clock Speed
  • 3.3V-------- VCC
  • LIGHT------- backlight control terminal
  • GND--------- power negative
 
 
  • QoS
  • Νομοθεσία