CPU
CPU ModelAMD Ryzen V1500B CPU Quantity1 CPU Architecture64-bit CPU Frequency4-core 2.2 GHz Hardware Encryption Engine (AES-NI)
Memory
System Memory2 GB DDR4 ECC SODIMM Memory Module Pre-installed2 GB (2 GB x 1) Total Memory Slots2 Maximum Memory Capacity32 GB (16 GB x 2) Notes
- Synology reserves the right to replace memory modules with the same or higher frequency based on supplier's product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
- Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
- For more information about the recommended memory configurations, please check the Hardware Installation Guide of your Synology product.
Storage
Drive Bays4 Maximum Drive Bays with Expansion Unit8 (RX418 x 1) Compatible Drive Type*
(See all supported drives)
- 3.5" SATA HDD
- 2.5" SATA SSD
Hot Swappable Drive* Notes
- "Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
- The maximum raw capacity is not limited by the maximum single volume size. Synology NAS models may utilize capacities over the maximum single volume size as long as each volume created is below the limit. (Learn more)
External Ports
RJ-45 1GbE LAN Port4 (with Link Aggregation / Failover support) USB 3.2 Gen 1 Port*2 eSATA Port1 Notes
- This device's 1GbE LAN ports have a maximum transmission unit (MTU) size of 1,500 bytes.
- The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.
PCIe
PCIe Expansion1 x Gen3 x8 slot (x4 link)
File System
Internal Drives
External Drives
- Btrfs
- EXT4
- EXT3
- FAT
- NTFS
- HFS+
- exFAT
Appearance
Form Factor (RU)1U Size (Height x Width x Depth)
RS822+ :44 mm x 480 mm x 492.6 mm
RS822RP+ :44 mm x 480 mm x 518.6 mm Weight
RS822+ :6.4 kg
RS822RP+ :8.0 kg Rack Installation Support*4-post 19" rack (Synology Rail Kit -
RKM114/RKS-02) NotesThe rail kit is sold separately
Others
System Fan
RS822+ :40 mm x 40 mm x 3 pcs
RS822RP+ :40 mm x 40 mm x 2 pcs Fan Speed Mode
- Full-Speed Mode
- Cool Mode
- Quiet Mode
Power Recovery Noise Level*
RS822+ :27.4 dB(A)
RS822RP+ :38.8 dB(A) Scheduled Power On / Off Wake on LAN / WAN Power Supply Unit / Adapter150 W Redundant Power Supply
RS822+ :-
RS822RP+ : AC Input Power Voltage100 V to 240 V AC Power Frequency50/60 Hz, Single Phase Power Consumption47.69 W (Access)
16.7 W (HDD Hibernation) British Thermal Unit162.83 BTU/hr (Access)
57.02 BTU/hr (HDD Hibernation) Notes
- For more information on how power consumption is measured, refer to this article.
- Noise testing was conducted with the Synology system fully installed with Synology SATA HDDs and in an idle state. Two GRAS 40AE microphones are placed at a 1 m distance from the front and rear of the device. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%
Temperature
Operating Temperature0°C to 35°C (32°F to 95°F) Storage Temperature-20°C to 60°C (-5°F to 140°F) Relative Humidity5% to 95% RH
Certification
- FCC
- CE
- BSMI
- VCCI
- RCM
- UKCA
- EAC
- CCC
- KC
- UL
Warranty
3-year hardware warranty, extendable to 5 years with
Extended Warranty Plus Notes
- Availability varies by region. Before purchasing, please visit the official web pages of EW201/202 and Extended Warranty Plus for a list of eligible regions.
- The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
Environment
RoHS Compliant
Packaging Content
RS822+ :
- Main Unit X 1
- Accessory Pack X 1
- AC Power Cord X 1
- Quick Installation Guide X 1
RS822RP+ :
- Main Unit X 1
- Accessory Pack X 1
- AC Power Cord X 2
- Quick Installation Guide X 1
Optional Accessories
- DDR4 ECC SODIMM: D4ES02-4G/D4ES02-8G/D4ES01-16G
- Expansion Units: RX418
- 3.5" SATA HDD: HAT5300/HAT3300
- 2.5" SATA SSD: SAT5210
- M.2 SSD & 10GbE Combo Adapter Card: E10M20-T1
- M.2 SSD Adapter Card: M2D20/M2D18
- 25GbE Network Interface Card: E25G21-F2
- 10GbE Network Interface Card: E10G21-F2/E10G18-T2/E10G18-T1
- Rail Kit Sliding: RKS-02
- Rail Kit Mounted: RKM114*
- Surveillance Device License Pack
Notes
- Certain items may not be available in your location. Please contact your local distributors for more information.
- Upgrade to DSM 7.2-64551 or later before installing the M2D18.
- All memory modules will operate at the maximum frequency specified by the CPU manufacturer.